Portable Dust Collection Systems
Portable Dust Collection Systems to conform with OSHA Directive 1926.1153 for Crystalline Silica containment. These compressed air powered systems can be used with percussion tools, rock drills, saws or grinders that are powered by compressed air or electricity. They are portable systems that have no moving parts, and therefore, minimal maintenance. The HEPA filters have a 2 to 3 year life expectancy, can be easily cleaned with compressed air and can occassionally be washed.
Since these Dust Collection Systems do not use water as an aid in dust reduction, they can be used all year long and in all climates. The systems are small and portable for use indoors or outdoors. The collected dust and debris is not considered hazardous waste so it can be discarded with the trash.
In order to lessen the potential risk of exposure to airborne dust, filters and canisters are located a minimum of 30 feet from the operator via vacuum hoses or ducting. When canisters require the dust and debris to be removed, that large plastic bags allow plenty of room to seal the dust prior to removal from the canister.
TX-DCS2 - SMALL, SINGLE USER, PORTABLE DUST COLLECTION SYSTEM (2") w/ 20 GALLON CANISTER
Small, Single User, Portable Dust Collection System (2") to conform to OSHA Directive 1926.1153 for Crystalline Silica containment. This compressed air powered system can be used with compressed air powered tools or electric tools. It can be used with percussion tools, drills, saws or grinders, and it is designed to work with one tool at a time. The unit requires approximately 40 cfm of compressed air at 90 psi (pressure required for most air tools to operate properly) to create the suction (vacuum) needed to draw the dust away from the work being performed.
This system comes with a HEPA Filter and Cyclonic Filter, a 25' vacuum hose, a 5' vacuum hose whip and a TX-2AM Mini Air Mover. The TX-2AM Mini Air Mover is the vacuum. This Mini Air Mover supplies the suction power needed to draw the dust away from the tool. The 2" Vacuum Hose can be adapted to any vacuum port on any tool. Adapters sold separately.